頁面目錄
情境說明：
本文說明如何重新安裝FortiGate的Firmware
環境說明：
準備需要的工具
- 3CDaemon or tftpd軟體
- Putty or SecureCRT軟體
- Console Line
- FortiGate Firmware (視手邊的設備型號決定，至官方網站下載)
重刷Firmware：
Step1.設定網路環境
電腦連接FortiGate的console和網路port，電腦網卡設定相同網段IP和關閉防火牆
Step2.設定TFTP伺服器環境
在TFTP軟體設定好 Firmware上傳路徑
Step3.開始重刷Firmware
在出現”Please wait for OS to boot, or press any key to display configuration menu“時按下任意鍵以進入設定模式
[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.
Enter C,R,T,F,I,B,Q,or H: G (輸入G，從TFTP來源進行更新)
Please connect TFTP server to Ethernet port ‘WAN1‘.(電腦連接至WAN1)
Enter TFTP server address [192.168.1.148]:(設定TFTP Server IP)
Enter local address [192.168.1.1]:(設定防火牆IP)
Enter firmware image file name [image.out]: FGT_60D-v6-build0457-FORTINET.out(輸入Firmware檔名)
Connect to tftp server 192.168.1.148 …(重刷Firmware中)
##########################
Image Received.
Checking image… OK(重刷完成)
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?D(設定成Default)
Programming the boot device now.(FortiGate重開機)
…………………………………………………………………………………………………………………
Booting OS…
Reading boot image… 1321188 bytes.
Initializing firewall…
System is starting…
FGT60D4615082189 # get sys status
Version: FortiGate-60D v6.0.14,build0457,211118 (GA)
(FortiGate重開機後使用get sys status指令確認Firmware重刷完成)
